Atomlab 500

086-300 atomlab 500 dose calibrator
The Atomlab™ 500 provides fast, accurate radionuclide activity measurements with performance that easily complies with the most stringent regulatory requirements. The system consists of a low pressure ionization chamber, electrometer with extraordinary linearity and an auto-ranging color touch screen display. One dose calibrator can be used for a wide variety of nuclear medicine, PET and radioimmunotherapy applications. Additionally, there are advanced, but easy-to-use programs for nuclear pharmacy, radiochemistry and radiochromatography.

Activity measurements are performed by the microprocessor controlled electrometer located within the chamber assembly. The chamber is shielded with .25″” (6.3 mm) lead. It can be located up to eight feet away from the display unit. Chamber bias is generated by an electronic high voltage supply, eliminating the need for expensive battery changes.

Every element of the design and technical development will increase dose accuracy, department productivity and regulation compliance. The attractive and intuitive human interface guides the user through each operation. Software can easily be updated via the Biodex website or by using a convenient memory card. The touch-screen display can rest on a bench or mount on the wall of a hot lab, hot cell or laminar flow hood.

In addition to powerful self diagnostics, the Atomlab 500 includes an exclusive chamber monitoring technology to assure longer life and accuracy. Integrated pressure and temperature sensors feedback data so that the influence

Easy to use, large color touch screen display with intuitive menus
Automatic range selection; ranges up to 100 Curies of Tc-99m or 25 Curies of F-18
Pre-programmed for 88 most commonly used radionuclides; any 12 can be conveniently touch selected
Displays in Curies or Becquerels
Small footprint economizes workspace
Ultra-fast response
Robust software and extensive functionality
Report and label printers available
The USB ports also allow software upgrades via USB memory devices.
Desktop or wall mount display
Communicates with most commercially available NM management systems via bi-directional serial communications port
USB ports offer the ability to accommodate a USB mouse and printing devices.
Two-year warranty
Standard Apps for Atomlab 500 include

Automated Quality Assurance Apps
– Constancy and Expanded Constancy
– Linearity and Auto Linearity
– Accuracy
– Geometry

Nuclear Pharmacy Apps:
– Future dose computation
– Volume determination
– Inventory control of 25 samples, correcting volume, activity and moly concentration

Multiple Detector Apps:
– Manages multiple ionization chambers

Wipe Test Counter Apps:
– Upgradeable at any time to include a wipe test counter

Display: LCD Touch Panel 6.5″” x 5″”, function keys are displayed for the operation being performed
Connector: RJ-12 for well cable
Power: This system uses XP Power Supply for Medical Use, Model #PDM60US15
Line Voltage: 100 to 240 VAC, auto selectable by the power supply, 1.5-0.75 amps
Line Frequency: 50/60 Hz, detachable line cord, built-in EMI filter and transient suppression
Auxiliary Ports: Two USB ports, one RS-232 port
Memory: Stores: Inventory and QA tests
Isotope Selection Keys: Twelve pre-programmed ™ Tc-99m, Tl-201, I-123, I-131, Cs-137, Co-57, Xe-133, Ga-67, In-111, F-18, Y-90,Mo-99; 25 user-defined isotopes and a full alphabetical list of 88 isotopes.
Activity Range: : 0.01 uCi to 100 Ci (.0004 MBq to 3700 GBq) of Tc-99m or 25 Ci of F-18
Energy Range: 25 keV to 3 MeV photons
Response Time: One to two seconds for doses greater than 200 uCi; three seconds for doses greater than 20 uCi; 50-100 seconds below 20 uCi of Tc-99m with default threshold; threshold adjustable to reduce counting time
Detector Linearity: ™ 1% or 0.2 ™Ci, whichever is greater
Electrometer Linearity: ™ 1% or 0.2 ™Ci, whichever is greater, up to 40 curies of Tc-99m, ™ 1.5% up to 100 curies of Tc-99m
Electrometer Accuracy: ™ 1% or 0.2 ™Ci, whichever is greater
Overall Accuracy: ™ 3% or 0.3 ™Ci, whichever is greater; overall accuracy is affected by such factors as the accuracy of the specific source calibration, geometric variations due to sample volume or configuration, detector linearity, electrometer accuracy and readout accuracy
Repeatability: ™ 0.3% above 1 mCi short term (24 hr); 1% long term (one yr)
Digital Calibration Dial: Four-digit dial with increment/decrement keys to change the value; range is from 0.0 to 999.9
Detector: Well-type pressurized ionization chamber, with Argon fill gas; well opening 2.75″” (7 cm), well depth 10.25″” (26 cm). Up to seven chambers can be serially connected to one display.
Chamber Gas Pressure: 149KPa gauge (21.6 psig) at 20 degrees C or 250KPa absolute (36.3 psia) at 20 degrees C. IATA regulation 3.2.2.4 Exempts Gases of Division 2.2 from Dangerous Goods Regulations when transported at pressure less than 200KPa gauge (29 psig) at 20 degrees C. Device is shipped standard goods.
Detector Shielding: .25″” (6.3 mm) lead on all sides except top well opening; supplementary shielding available
Chamber Bias: 355 ™ 5 volts
Environmental Operating Conditions: Temperature: 0-40™ C; Humidity: 0-90%, non-condensing
Power Requirements: 100 to 240 VAC, 0.38 ™ 0.15 amps, auto switching; XP Power Supply (PDM60US15), for medical use.
Line Frequency: 50/60 Hz; detachable line cord; built-in EMI filter and transient suppression
Detector and Interface Cables: 8′ (243 cm) long, six conductor cables (two carry power; two chassis ground; two carry serial data for digital I/O)
Display Unit:
– Dimensions: 9.5″” w x 12″” depth x 12″” h (24.1 x 30.5 x 30.5 cm)
– Weight: 6.3 lb (2.9 kg); desktop or wall mountable
Detector Unit:
– Dimensions: 6″” dia x 15.5″” h (15.24 x 39.37 cm)
– Well I.D.: 2.75″” dia x 10.5″” h (7 x 26.7 cm)
– Well I.D. with Liner: 2.5″” dia x 10.25″” h (6.35 x 26 cm)
– Lead Shielding: .25″” lead (6.3 mm)
– Weight: 35 lb (16 kg)
Approvals: ETL to UL 60601-1 and cETL to CAN/CSA C22.2 No. 601-1-M90
IEC 60601-1, IEC 60601-1-4 and IEC 60601-1-2 and CE marked
Warranty: Two-year
086-330 Atomlab 500 Dose Calibrator, 100-240 VAC, Includes: Smart Display, ionization chamber, RS-232 port, vial/syringe dipper and well insert.

086-333 Software, Atomlab 500 Data Manager
086-334 Cable, European to Wall Outlet
086-336 Chamber, Dose Calibrator
075-594 Chamber, Wipe Test
086-341 Printer, Label, Dymo
Includes one roll 086-343 labels; two rolls 086-344 labels
086-339 Printer, Ink Jet (report)
086-338 Shielding Rings, Interlocking, 2.25″” lead
For additional protection from high energy activity
086-243 Copper Dipper, Vial/Syringe
086-423 Moly Shield, Vial, .3″” lead
086-435 Moly Shield, Syringe, .3″” lead
Vial Dose Calibrator Sources
Syringe Dose Calibrator Sources
086-509 Lineator
Replacement:
086-242 Vial/Syringe Dipper
086-241 Well Insert
086-343 Label, Blank,Lg, 300/roll
(For Dymo Printer, 086-341)
086-344 Labels, “”Radioactive””, Sm, 260/roll
(For Dymo Printer, 086-341)