Protector Stainless Steel Radioisotope Laboratory Hoods

Protector Stainless Steel Radioisotope Laboratory Hoods
Protector Stainless Steel Radioisotope Laboratory Hoods provide protection from applications requiring the use of radiochemicals. They feature fully sealed integral work surfaces and coved interiors to facilitate decontamination.
Available in 4, 5, 6 and 8-foot widths, these benchtop hoods feature a corrosion-resistant Type 304 stainless steel interior. The one-piece liner is free of joints, cracks or crevices to prevent build-up of residue and simplify decontamination procedures.
By-pass airflow design
Curved air foil allows air to sweep the work surface while Clean-Sweep™ openings pull inflow air from under the air foil.
Glacier white, dry powder epoxy-coated steel exterior
Seamless Type 304 stainless steel liner with integral work surface
Black enamel-coated hardboard surface to support the integral work surface
Tempered safety glass vertical-rising sash with frame of epoxy-coated aluminum and PVC
Removable front and side panels and front access panels for access to plumbing and electrical wiring
Energy-efficient T8 fluorescent lighting,
Light switch and blower switch for 115 volt, 60 Hz operation pre-wired to a single point internal junction box
Two pre-plumbed service fixtures with forged brass valves and chrome-plated brass serrated hose connectors, lower right side with brass tubing for gas and lower left side with copper tubing for air
Pre-wired 115 volt electrical duplex receptacle on lower right side
11″ OD Type 304 stainless steel exhaust connection(s)
Weight: 705.0 lbs
Weight metric: 320.0 kg
Dimensions: 48.0″ w x 33.2″ d x 59.0″ h
Dimensions metric: 120.0 cm x 84.3 cm x 149.9 cm
Electrical: 115 volts, 60 Hz, Domestic
Product Subcategory: Radioisotope
Nominal Width: 4′
Alternate Air Usage/Static Pressure at 100 fpm: With sash full open, exhausts 730 CFM at 0.20″ H2O static pressure
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL
Electrical Duplexes: 1
Electrical Standard: Domestic
Lighting: T8 fluorescent
Service Fixtures: 2
Style: Benchtop
Width: Between 41″ and 60″
4′, 5′, 6′ and 8′ widths

Required Accessories
Remote Blowers
Base cabinets
Adjustable Height Base Stands

Optional Accessories
Electrical Duplex Kits
Airflow monitors
Sash stops
Ceiling Enclosure Kits
Side Enclosure Kits
Rear Finish Panel Kits