Surgical C-Arm Table – 846
Its large radiolucent area, motorized actuation of height, and free-float tabletop make it ideal for both pain care and cardiovascular applications. The radiolucent area is free of cross members, allowing full fluoroscopic visualization and unobstructed C-Arm positioning. Functional design provides complete access with reduced radiation exposure to clinicians. Two-inch thick table padding and three adjustable straps with hook and loop fastening assure patient comfort and stability. The contoured tabletop features a face cutout for comfortable prone positioning.
Control Made Easy
The portable, hand-held controller offers the freedom to adjust height from any point around the table. A push-button release, for the free-float feature, is located at the end of a handgrip.
As required by law, all Biodex C-Arm tables are CDRH registered and FDA Device Listed. All motorized tables are ETL product listed to the UL-60601-1 Medical Electrical Equipment Safety Standard.
Low attenuation carbon fiber tabletop, with choice of standard contoured or
Contoured tabletop features a face cutout for comfortable prone positioning
High-speed actuator for quick vertical movement
Convenient positioning with portable hand-held controller
Free-float X-Y tabletop
500-lb patient capacity
Low profile base for C-Arm clearance
Control Made easy
The portable, hand-held controller offers the freedom to adjust height from any point
around the table. A push-button release, for the free-float feature, is located at the
end of a handgrip.
Choice of Tabletop Design
INNOVATIVE CONTOUR DESIGN TOP
This design fully accommodates C-Arm positioning for closest possible access to the cervical spine, achieving optimum image resolution. A second benefit is the added workspace at the head end, while maintaining the narrowness required for cervical procedures. Features a cutout for comfortable, prone positioning.
The rectangular tabletop offers additional space to allow for superior image quality for long-leg runoff studies.
Tabletop: 101″ l x 24″ w (252 x 61 cm) – choice of classic contoured or rectangular design
– 51″ l x 24″ w (128 x 61 cm) unobstructed head to accessory rail
– 20″ l x 17.5″ w (50.8 x 44 cm) additional, between accessory rails
Radiolucent Area: Total Length: 71″ l (178 cm)
Tabletop Material: Carbon Fiber with integral head section
Mattress: Seamless, 2″ thick (5 cm)
– Tabletop: .7 mm Aluminum equivalence
– Mattress: .5 mm Aluminum equivalence
– Height: Adjustable from 33.5″ to 43.5″ (84 to 109 cm)
– Tabletop X Motion (head-to-toe float): 20″ (51 cm)
– Tabletop Y Motion (side-to-side float): 10″ (25.4 cm)
– Hand Control: activates height
– Push Button: releases X-Y Tabletop motions
– Head End – 3″ (7.62 cm) swivel casters, integral locking system on base
– Foot End – 5″ (12.7 cm) swivel casters with central locking
Accessory Rails: Standard OR accessory rails 49.5″ x 1.12″ x .375″ (124 x 2.86 x .95 cm) mounted near foot end of table
Patient Restraints: Three body straps
Patient Capacity: 500 lb (227 kg); weight tested to four times the patient load rating.
Lift Capacity: May vary between 460 lb – 500 lb (209-227 kg) based on line voltage
Power: 115 VAC or 230 VAC
Certifications: ETL and cETL listed to UL 60601-1®, CAN/CSA© C22.2
No.: 601.1-M90 and EN 60601-1
Warranty: Two years parts and labor
058-846-10 Table, Surgical C-Arm – 846, 115 VAC, REC
058-847 Table, Surgical C-Arm – 846, 230 VAC
058-847-10 Table, Surgical C-Arm – 846, 230 VAC, REC
058-848 Catheter Tray Extension (removable)
056-850 IV Pole, Rail Mounted
056-865 Arm Board, Carbon Fiber, one arm
056-866 Arm Board, Carbon Fiber, two arms
Fits Surgical C-Arm Tables 840, 846 and 870 Pain Management Table
058-864 Arm Board, Surgical, Carbon Fiber
058-849 Clamp, Accessory, C-Arm Table
058-856 Radiation Shield, Head/Cervical
058-857 Radiation Shield, Thoracic/AB